The requirements of the constant temperature and humidity laboratory in many aspects, among which the requirements for water supply are very strict, not only to ensure a continuous supply of water, but also to reduce waste and ensure the temperature of water, etc. I will give you a detailed introduction What are the water supply requirements of the sub-constant temperature and humidity laboratory?
1. The temperature of the constant temperature and humidity laboratory water supply should be within the specified range, not higher than forty degrees, and always be kept below forty degrees. If the temperature is too high, it will inevitably destroy the normal environmental requirements. As a result, the test cannot be performed normally.
2. When some equipment in the constant temperature and humidity laboratory is working, the water supply cannot be interrupted. There must be continuous supply of water at all times, because once there is no water, normal work cannot be performed.
3. The method for controlling the temperature of water is to turn on the temperature control switch, and then press the corresponding key to set the required temperature of the water, then press the Enter key, and finally press the Escape key. Back to the main menu.
4. When performing accelerated tests in a constant temperature and humidity laboratory, keep a record of the humidity and temperature in the laboratory every day. If you find any abnormal conditions, you must contact the professional staff in a timely manner.
5. Before conducting the test, you must carefully read the product quality standards in detail, make a reasonable selection of the temperature and humidity conditions required for the experiment, and set the specific values of the required temperature and humidity.
6. To save water and reduce water waste, when you leave the laboratory, you must turn off the water, which means that people stop walking and reduce unnecessary waste.
In terms of water supply, the constant temperature and humidity laboratory must be done in accordance with the above requirements. On the one hand, the temperature of the water should be adjusted, and on the other hand, the correct operation should be carried out. Experiences and lessons in water supply are recorded in a timely manner, so that when specific situations are encountered, they can be handled quickly.
Guangdong Renfeng Industrial Co., Ltd. is currently one of the rare laboratory design and construction solution providers in China. The company has a professional laboratory design team, laboratory decoration construction teams covering the country, and its own laboratory furniture factory. The company specializes in laboratory design, laboratory furniture production and laboratory decoration engineering, laboratory ventilation and purification engineering, laboratory professional equipment consumables sales, laboratory information management system construction and other services.
Address: Room 215, No. A01, Guangdong South China Testing Park, No. 78, Luntou Road, Haizhu District, Guangzhou